Checking The Status Of Fax Jobs; Checking Fax Job Details - Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual

Checking the Status of Fax Jobs

This section describes how to check the status of fax jobs. For more information,
see Chapter 5, "Checking Job and Device Status," in the Reference Guide.
NOTE
•
If Job Log Display in System Settings (from the Additional Functions screen) is set to
'Off', [Log] is not displayed on the System Monitor screen.
•
This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.
•
The maximum number of jobs that are displayed is:
- Send Job Status screen:
- Received Job Status screen:
- Log screen:

Checking Fax Job Details

You can check the detailed information of any fax job, such as the destination and
the date and time the job was specified.
1
Press [System Monitor].
If necessary, see the screen shot in step 1 of "Checking Send Job Details," on p.
8-2.
64 jobs
1 job (The optional Super G3 FAX Board is installed.)
2 jobs (The optional Super G3 Multi-Line Fax Board is
installed.)
100 jobs

Checking the Status of Fax Jobs

8
8-9