Stamping Originals
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned and sent originals.
5
IMPORTANT
•
The Stamp mode cannot be used with the Document Size Select (Other Size) or 2-Page
Separation mode.
•
The Stamp mode cannot be used when sending a fax document in the Direct Sending or
Manual Sending mode.
NOTE
The stamp is applied to the originals that are scanned from the feeder.
1
5-20
Sending Methods
NOTE
The number of scanned pages is displayed on the Send Process screen.
Position at which
stamp is applied
Vertical Placement
Place your originals in the feeder ➞ specify the destination ➞
press [Send Settings].
NOTE
You can also set the Stamp mode by pressing [Stamp] in Edit Standard Send
Settings in TX Settings under <Common Settings> in Communications Settings
(from the Additional Functions).
Position at which
stamp is applied
Horizontal Placement