Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual page 313

● If the Enter Network Password screen is displayed:
❑
Specify each setting ➞ press [OK].
The Enter Network Password screen is displayed if either one of the following
is true:
•
If <Login Information> in Register LDAP Server in System Settings (from the
Additional Functions screen) is set to 'Use', and <Display authentication
dialog when searching> is set to 'On'.
•
If the user name, password, and domain name specified in Register LDAP
Server in System Settings (from the Additional Functions screen) are
incorrect.
[User]:
Press [User] ➞ enter the user name ➞ press [OK].
[Password]:
Press [Password] ➞ enter the password ➞ press [OK].
After pressing [OK], the password that you entered appears as asterisks
(********) on the Enter Network Password screen.
6
Select the destination that you want to store in the Address
Book from the search results ➞ press [Next].
To continue searching, press [Back].
You can select multiple destinations.
If you want to select the first 64 destinations, press [Select All (Max 64
destinations)]. (If a destination is selected, the key changes to [Clear Selection].)
E-mail addresses that meet the specified search criteria are displayed. You can
register the selected e-mail address as an I-fax address by pressing [Register
e-mail address for I-Fax]. To register e-mail addresses as I-fax addresses,
register one e-mail address at a time.
If the optional Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed,
fax numbers that meet the specified search criteria are also displayed.
If the optional Super G3 FAX Board or Super G3 Multi-Line FAX Board is installed,
you can restrict the type of destinations displayed in the results list by pressing
the Type drop-down list.
NOTE
To cancel a selected destination, select the destination again to clear the check
mark.
Storing New Addresses
10
10-27