Using the Browse Key (NetWare (IPX))
1
2
2
3
4
2-18
Specifying Destinations Using the New Address Tab
Press [New Address] ➞ [File].
Press the Protocol drop-down list ➞ select [NetWare (IPX)].
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings to elapse before pressing [Browse]. Network transmission is not possible
until this startup time has elapsed. (See Chapter 3, "Using a TCP/IP Network," in
the Network Guide.)
Press the drop-down list ➞ select [NDS] or [Bindery] from the
drop-down list.