Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual page 156

2
5
5-4
Sending Methods
Specify each setting ➞ press [Done].
[Sender's Names (TTI)]:
Press [Sender's Names (TTI)] ➞ select sender's name ➞ press [OK].
The name registered under <00> is selected by default.
[Direct]:
You can select either the Direct Sending or Manual Sending mode by pressing
[Direct].
To select the Direct Sending mode, press [Direct], and the key lights.
To select the Manual Sending mode, do not press [Direct], and the key remains
unlit.
You can also set Direct Sending mode on the screen for specifying a new fax
destination. (See "Specifying a Fax Number," on p. 2-2.)
[Line Selection]:
If the optional Super G3 Multi-Line Fax Board is installed, select the line to use for
sending.
Select [Line 1], [Line 2], or [Auto] ➞ press [OK].
[Line 1]: Standard line
[Line 2]: Additional line
[Auto]: Selects the line according to the setting for TX Line Selection in Dual
Line Options under <Fax Settings> in Communications Settings (from
the Additional Functions screen). (See "Selecting the Line for Sending,"
on p. 9-55.)