Selecting The Copy Paper Size (Paper Select); Automatic Paper Selection (Auto Paper Selection) - Canon iR3300 Copying Manual

Selecting the Copy Paper Size Selecting the Copy Paper Size
Selecting the Copy Paper Size Selecting the Copy Paper Size
You can set the machine to automatically select the paper size, or you can specify the paper size
for a copy job.
NOTE
• • • •
When copying an original onto the same size paper at a 100% copy ratio, the periphery of the original may be cut
slightly on the copy. For details of the size of the non-image areas, see the Reference Guide.
• • • •
If you select the Entire Image mode, the copied image is automatically reduced slightly based on the paper size and the
image size. As a result, the entire original image is reproduced on paper without being trimmed. (See 'Slightly Reducing
Images to Prevent the Original from Being Trimmed (Entire Image)', on p. 1-33.)
• • • •
For instructions on setting paper in the stack bypass, see the Reference Guide.

Automatic Paper Selection (Auto Paper Selection)

Automatic Paper Selection (Auto Paper Selection)

Automatic Paper Selection (Auto Paper Selection) Automatic Paper Selection (Auto Paper Selection)
The machine automatically selects copy paper.
IMPORTANT
• • • •
When the machine is operating in the Automatic Paper Selection mode, you cannot use the Auto Copy Ratio, XY Auto
Copy Ratio, Rotate Collating, Rotate Grouping, Saddle Stitch, Booklet, Image Combination, Image Separation, or
Image Repeat (Auto) modes.
• • • •
When the machine is operating in the Different Size Originals mode in combination with the Shift mode or the Cover/
Sheet Insertion mode, you cannot use the Automatic Paper Selection mode.
• • • •
You cannot use the Automatic Paper Selection mode when copying the following types of originals. Copy these
originals using the Manual Paper Selection mode.
- Non-standard size originals
- Highly transparent originals such as transparencies
- Originals with an extremely dark background
- Originals smaller than A5 in size
NOTE
• • • •
The default setting is [Auto].
• • • •
When the Drawer Eligibility for APS/ADS of the paper drawers in the Common Settings is set to [Off], you cannot make
copies in the Automatic Paper Selection mode. (See the Reference Guide.)
(Paper Select) (Paper Select) (Paper Select) (Paper Select)

Selecting the Copy Paper Size (Paper Select)

1 1 1 1
1-17 1-17
1-17 1-17