1
Place your originals ➞ specify the destination ➞ press the
Scan Settings drop-down list ➞ select the scan mode.
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."
NOTE
•
Specifying the scan mode again cancels the scan mode and other scan features
previously set.
•
You can also select a scan mode by pressing [Option] from the Scan Settings
drop-down list to display the Scan Settings screen ➞ press the Scanning Mode
drop-down list ➞ select a scan mode.
2
Press
(Start).
If [PDF (Trace)] or [PDF (Compact)] is selected as the file format, select a scan
mode from the Scanning Mode drop-down list whose Color Selection mode and
resolution have been registered as one of the following combinations. If you
select a combination other than those listed below, a message asking for your
confirmation to change the file format appears on the screen.
•
Auto-Color Select (Full Color/Grayscale) and 300 x 300 dpi
•
Full Color and 300 x 300 dpi
•
Grayscale and 300 x 300 dpi
NOTE
You can store the changed settings. (See "User Preset Keys," on p. 4-17.)
Selecting a Scan Mode
3
3-3