Basic Removal Procedures; Duplex Unit - Ricoh J001 Service Manual

BASIC REMOVAL PROCEDURES

3.2 BASIC REMOVAL PROCEDURES

3.2.1 DUPLEX UNIT


CAUTION
Switch the printer off and disconnect it from the power supply before you
do the procedures in this section.
Important!
T ,
O AVOID INK SPILLS NEVER TURN THE PRINTER UPSIDE DOWN OR SET IT ON EITHER ITS
. T
LEFT OR RIGHT SIDE
.
SERVICING
1. Raise the left release tab [A] and right release tab [B] to the unlock positions.
2. Lift and pull the Duplex Unit [C] out from the back of the printer.
Reinstallation
• Make sure to press down and lock the left and right release tabs after you set the
Duplex Unit in the machine.
J001/J003
CÓPIA NÃO CONTROLADA
HE PRINTER MUST REMAIN UPRIGHT ON A FLAT SURFACE DURING
[A]
3-2
CÓPIA NÃO CONTROLADA
[B]
[C]
G707R901.BMP
SM