Set Charge For Target Market; Print Head Temperature Thresholds - Ricoh J001 Service Manual

Set Charge for Target Market

1238 CHG:REGION
Use the SP to set the charge for the areas listed below.
0: Enable geographical area setting
1: Japan
2: NA (North America)
3: Europe
4: China (Mainland)
5: China (Taiwan) "5" and "4" refer to same pitch table.
6: Asia. "4" "5" "6" refer to same charge pitch table
If any item other than "0" is selected that item and its setting is enabled and
takes priority.
[0 to 6/0/1/---]

Print Head Temperature Thresholds

1300 HTEMP:H:STOP
1301 HTEMP:H:JUDG
1302 HTEMP:H:RCVR
1303 HTEMP:L:RCVR
1304 HTEMP:L:JUDG
1305 HTEMP:L:STOP
Use this SP to set the threshold for the operating temperature range of the print
head.
[0 to 1000/0/1/0.1
Ambient Temperature Thresholds
1306 ETEMP:H:STOP
1307 ETEMP:H:JUDG
1308 ETEMP:H:RCVR
1309 ETEMP:L:RCVR
1310 ETEMP:L:JUDG
1311 ETEMP:L:STOP
Use this SP to set the threshold for the operating humidity range of the print
head.
[0 to 1000/0/1/0.1
SM
CÓPIA NÃO CONTROLADA
Set Charge for Geographic Region
Trigger Shutdown: Standby, Printing
Trigger Shutdown: Power On
Recovery After High Temp Shutdown
Recovery After Low Temp Shutdown
Trigger Shutdown: Power On
Trigger Shutdown: Standby, Printing
o
C
High Temperature to Trigger Shutdown: Standby, Printing
High Temperature to Trigger Shutdown: Power On
Recovery After High Temp Shutdown
Recovery After Low Temp Shutdown
Low Temperature to Trigger Shutdown: Power On
Low Temperature to Trigger Shutdown: Standby, Printing
o
C
5-17
CÓPIA NÃO CONTROLADA
SP Tables
J007/J010/J011