Set Threshold For Automatic Print Head Cleaning - Ricoh J001 Service Manual

SP Tables
5.2.3 GROUP 2000
Set Threshold for Near-Full Alert
2000 TH:WASTE:R:SNS
Use this SP to set the threshold value to trigger near full alert for the ink collection
tank sensor.
[0 to 1023/0/1/---]
2001 TH:WASTE:R:SOFT Software Count : Right Toner Collection Unit
Use this SP to set the threshold value to trigger the full alert for the ink collection
tank sensor.
[0 to 2147483647/0/1/nl]
2002 TH:WASTE:R:FULL Software Count : Right Toner Collection Unit
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the right ink collection tank sensor.
[0 to 2147483647/0/1/nl]
2003 TH:WASTE:L:NEAR Software Count : Left Toner Collection Unit
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the left ink collection tank sensor.
[0 to 2147483647/0/1/nl]
2004 TH:WASTE:L:FULL
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the left ink collection tank sensor.
[0 to 2147483647/0/1/nl]

Set Threshold for Automatic Print Head Cleaning

2100 TH:ACL:MIST:B
Use this SP to set the threshold value of the mist counter that triggers automatic
print head cleaning before capping at the end of a print job.
[0 to 2147483647/0/1/nl]
2101 TH:ACL:MIST:B
Use this SP to set the threshold value of the mist counter that triggers automatic
print head cleaning between pages during a print job.
[0 to 2147483647/0/1/nl]
2102 TH:ACL:FEED
Use this SP to set the threshold value of the paper dust counter that triggers
automatic print head cleaning before capping at the end of a print job.
[0 to 65535/0/1/Pages]
2103 TH:ACL:AL:T1H1
2104 TH:ACL:AL:T1H2
J007/J010/J011
CÓPIA NÃO CONTROLADA
Toner Collection Unit Sensor
Software Count: Left Toner Collection Unit
Before Capping (Mist Count)
During Printing
Before Capping (Paper Dust Count)
Idle Time (1 Hour): Humidity Step 1
Idle Time (1 Hour): Humidity Step 2
5-18
CÓPIA NÃO CONTROLADA
SM