Cooling Fan; Duplexer Detection Board - Ricoh J001 Service Manual

Component Removal

3.4.10 COOLING FAN

1. Disconnect the fan harness [1], [2] ( x1,
2. Remove screws [3], [4] ( x2)
3. Remove the cooling fan [1].
Reassembly
Make sure that the harness is set in the gap [2] before you reconnect the motor.

3.4.11 DUPLEXER DETECTION BOARD

J007/J010/J011
CÓPIA NÃO CONTROLADA
x1)
3-28
CÓPIA NÃO CONTROLADA
SM