Charge Pitch Table - Ricoh J001 Service Manual

Example 2: Mj4 and Humidity Is Less Than 10%
Table 3-10b Mj4 Temperature/Humidity Table (Bold Text Shows Row for <10%)
Reading this line from left to right we count 15 repetitions for "3" and the table below how
shows how the firmware calculates the actual value of the setting. The count for Charge
ID1 exceeds 15 counts for the remaining IDs are set to "0".
The firmware takes the number of times the each ID is repeated and converts this reading
first to binary, hexadecimal, and then finally to decimal to determine the actual value of the
setting that will be used.
In the table above we can see that the hexadecimal value "FC00" converts to decimal
"64512" so this means that SP1224 is set to "64512".

4.6.4 CHARGE PITCH TABLE

The variables that determine which value is retrieved from the Charge Pitch Table are 1)
the ID determined with the Temperature/Humidity Table, 2) the the paper type, 3) whether
printing will be done on Side 1 or Side 2.
The tables below are the Charge Pitch Tables stored in NVRAM before the printer is
shipped from the factory.
J011
Print Drive Wave Form: Mj1
SM
CÓPIA NÃO CONTROLADA
**T924
4-41
CÓPIA NÃO CONTROLADA
Transport Belt Charge Adjustments
J007/J010/J011
**T923