Shutdown - Roland EGX-350 User Manual

˜
Main screen

Shutdown

Dark
When the screen shown in the figure at left appears after
approximately three seconds, press
The spindle head moves to a location on the inner-left side of the
machine. This operation is called "initialization."
The default for the language used for on-screen display is English.
To change the display language to Japanese, refer to the page indi-
cated below and change the language setting.
P. 33, "Selecting the Language Used for Text on the Display Screen"
When initialization ends, the screen changes to a display like that
shown at left (the mainscreen). This completes initialization.
Make sure the machine is not in opera-
tion, then turn off the power switch.
The display screen on the handy panel goes
OFF
dark.
3-2 Starting and Quitting
.
Chapter 3 Basic Operation 41