Expansion Connector - Roland EGX-350 User Manual

Expansion Connector

+24 V
This circuit works during spindle motor rotation.
N Be sure to use the connector within the rated
range shown above.
N Do not apply an additional voltage to the con-
nector.
N Do not short-circuit the connector and earthing.
Note: We are not responsible for devices connected to this connector.
Pin 1 Connec- Pin 2
tor
Ic (max) = 150mA
8-2 Interface Specifications
Adaptive Plug
Use a three-contact plug that meets the
size requirements above.
Do not use the terminal 3. Use only
the 1 and 2 terminals.
Chapter 8 Appendix 111