Understanding Default Values And Logins; Understanding Led Operations; Understanding The Device Front Panel - Ubee DVW3201B Subscriber User Manual

Understanding Default Values and Logins

1.7

Understanding Default Values and Logins

The DVW3201B is pre-configured with the following parameters. Some regions may
change default values using the cable modem or XML configuration file. Check with your
provisioning team to determine the default values for your region.
Local Port Address: 192.168.100.1, Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
 Primary SSID (subscriber-managed) = DVW3201B plus last 2 characters of the
cable modem's MAC address with upper letters entered in upper case.
Example: DVW3201BE3
Note:
If the subscriber changes the SSID, the device does not revert to this default
The MAC address can be found on the device label or it can be found by
 Encryption Method = WPA2-PSK with AES encryption
 WPA Pre-shared Key = DVW3201B plus the last 6 characters (3 octets) of the
cable modem's MAC address (UPPER case, if letters).
 WPS PIN = Randomly generated eight digit number
 Device Name: UbeeAP
 Standard User Web Interface Login:
Username: user
Password: user
1.8

Understanding LED Operations

The following section describes what the device LEDs indicate.
1.8.1

Understanding the Device Front Panel

The following image represents the front panel of the device. LED descriptions are
provided in the following table.
8
SSID when the device is reset, except when a manual reset is performed
through the Web UI (see
opening an Internet browser window to the device. Refer to
Information Option on page 21
Example: DVW3201B9822E3
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Understanding the Tools Menu on page
for instructions.
Ubee Interactive
81).
Using the