Understanding Default Values And Logins - Ubee DDW36C User Manual

Ubee Interactive
Physical and Environmental
 Dimensions: 1.77" (45mm) x 8.85" (225mm) x 9.45" (240mm)
 Weight: 800g (1 lb, 14 oz) (Contains internal PSU)
 Input: 90-120VAC, 50-60Hz
 Output: 12V 2.92A
 Operating Temperature: 0°C ~ 40°C (32°F ~ 104°F)
 Humidity: 5~90% (non-condensing)
1.7

Understanding Default Values and Logins

The DDW36C is pre-configured with the default parameters for Time Warner Cable.
Local Port Address: 192.168.100.1
Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
 Primary SSID (wireless network name) = "WIFI" plus the last 6 characters of the
Cable Modem (CM) MAC address. "-5G" is added when the 5GHz band is being
used.
 Examples:
 If you change the SSID, the device does not revert to this default SSID when
the device is power reset, except when a manual reset is performed through the
Web UI.
 The MAC address can be found on the device label or it can be found by
opening an Internet browser window to the device. Refer to
Option on page 19
 Security and Encryption Methods = WPA2-PSK with AES encryption
 WPA Pre-shared Key (PSK) = Unique key for each device. Also called the network
key or the wireless password. The WPA pre-shared key is a randomly generated
character string, 16 characters in length. It can be found on the device label and
on the Wireless Primary Network screen. Refer to
Option on page
 Example WPA PSK: HP3WZ7IHXCT6D9QS
 WPS PIN = The WPS PIN is a randomly-generated number. It can be found on the
device label and on the Wireless Primary Network screen. Refer to
Primary Network Option on page
 Device Name: UbeeAP
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015
1. 2.4G radio with CM MAC address 0071CC8E54C7
SSID: WIFI8E54C7
2. 5G radio with CM MAC address 0071CC8E54C7
SSID: WIFI8E54C7-5G
for instructions.
99.
Using the Primary Network
76.

Understanding Default Values and Logins

Using the Software
Using the
9