Using The Advanced Gateway Setup Port Filtering Option - Ubee DVW3201B Subscriber User Manual

Using the Advanced Gateway Setup Port Filtering Option

which you want to deny Internet access. Click Apply. For more information, refer to
Using the DHCP Static Lease Option on page
device always gets the same IP address. That way, if filtered, it gets filtered
continuously. Otherwise, the IP address would change for the device and the filtering
rule would not work.
Note
You may also filter by the MAC address which does not require setting a static lease.
Refer to Using the Advanced Gateway Setup MAC Filtering Option on page
Steps
To filter IP addresses:
1. Click the Gateway link from the top of the screen.
2. Click IP Filtering from the left side of the screen. The IP Filtering fields are explained
following this screen example.
Start Address
End Address
Enabled
Apply
5.9

Using the Advanced Gateway Setup Port Filtering Option

The Port Filtering option allows you to configure port filters to block to all devices on the
LAN Internet services that use specific ports.
46
Label
Defines the starting IP address to filter.
Defines the ending IP address to filter.
Activates the rule when enabled is checked.
Saves all screen changes when clicked.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
39. A static lease ensures that the
Description
Ubee Interactive
44.