Using The Advanced Gateway Settings Pass Through Option - Ubee DVW3201B Subscriber User Manual

Ubee Interactive
Trigger Range
Start Port
End Port
Target Range
Start Port
End Port
Protocol
Enable
Apply
5.12

Using the Advanced Gateway Settings Pass Through Option

The Pass Through option allows you to configure a pass through table. Devices in the
pass through table are treated as bridge devices that store and forward data between
LAN interconnections.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Label
Defines the trigger port or a range of ports that trigger the
router to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines a target range port or a range of ports a server on the
WAN uses when it responds to service requests. The router
forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Activates this rule when checked.
Saves all screen changes when clicked.

Using the Advanced Gateway Settings Pass Through Option

Description
53