Enabling A Closed Network - Ubee DVW3201B Subscriber User Manual

Using the Primary Network Option
WPS Setup AP
UUID
PIN
WPS Add Client
Add a client
Client PIN
Authorized Client MAC
Apply
6.2.1

Enabling a Closed Network

You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Disable the WPS automatic security configuration.
2. Click Apply.
3. Access the pull down menu for the Closed Network.
4. Choose Enabled to enable a closed network.
64
Label
Defines the universal unique identifier (UUID) for this access
point.
Defines the Personal Identification Number for this access
point.
Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
2. Click PUSH on the WPS Add Client screen.The WPS
3. Press the WPS button on the device.
Defines a PIN number for client access.
Defines the MAC address of the authorized client.
Saves settings when clicked.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Description
displayed.
button is activated on the device, indicated by a flashing
white light on top of the unit.
Ubee Interactive