Using the Operation Config Option
Modulation
Symbol Rate
(Ksym/sec)
Upstream Mini-Slot Size
Power Level
(dBmV)
T-1
T-2
T-3
T-4
4.5
Using the Operation Config Option
The Operation Config screen displays general information on the device's active
operational capabilities.
Steps
To view operation configuration information:
1. Click the Modem link from the top of the screen.
2. Click the Operation Config link from the left side of the screen. Field explanations are
listed below the following screen example.
26
Label
Displays the current cable modem upstream modulation type
(QPSK/ QAM8 /QAM16/ QAM32/ QAM64/ QAM128/ QAM256).
Displays the symbol rate.
Displays the current cable modem upstream mini-slot size in
Timebase Ticks of 6.25.
Displays the current cable modem upstream transmit power in
decibel millivolts.
Displays DHCP time expiration.
Displays DHCP time expiration.
Displays range response (RNG-RSP) time expiration.
Displays range (RNG) time expiration.
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Description
Ubee Interactive