Using The Advanced Gateway Setup Ip Filtering Option; Using Ip Filtering Best Practices - Ubee DVW3201B Subscriber User Manual

Ubee Interactive
Index
MAC Address
Clear
View Additional Rules:
Apply
5.8

Using the Advanced Gateway Setup IP Filtering Option

The IP Filtering option allows you to filter IP addresses to block Internet traffic to specific
network devices on the LAN. Any host on this list is not accessible to Internet traffic.
5.8.1

Using IP Filtering Best Practices

The following are best practices to set up IP filtering.
1. Make sure a PC is connected to the cable modem and both devices are powered on
and functioning.
2. Log in to the cable modem Web user interface. Refer to
on page
3. Go to Tools>>Client List. Your PC and other devices are listed. Note the MAC
address and IP address of the devices to which you want to deny Internet access. For
more information, refer to
4. Go to Gateway>>Static Lease. Enter the MAC address and IP address of devices to
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
Label
17.
Using the Client List Option on page

Using the Advanced Gateway Setup IP Filtering Option

Description
Assigns an index number to the rule.
Defines the MAC address to block.
Deletes the filtering rule when the Apply button is clicked and
the Clear box is checked.
Displays rules 11-20 when selected from the drop-down list, if
they exist. A total of twenty rules are supported.
Saves all screen changes when clicked.
Accessing the Web Interface
83.
45