Combination Reports; General Notes On Report Takings - TEC MA-1595-1 SERIES Owner's Manual

5. READ (X) AND RESET (Z) REPORTS
5.1

Combination Reports

Multiple reports can be programmed to be issued in one operation sequence.
programmable for combinations (max. 5 reports in one table, max. 3 tables).
representative for information of the contents of your Combination Report Tables or for changes.
Financial Report
All Cashier Report
All Salesperson Report
Credit Company Sales Report
Department Group Report
Media Sales and In-drawer Report
Hourly Range Report
All Department Report
All Media Sales & Cash-in-drawer Report
All PLU Report
All Customer Files Report
PLU Group Sales Report
KEY OPERATION: Mode Lock: X for Read
Enter the Report Combination-ID No.:
None (simply depress [AT/TL]): Daily Combination Report Table No.1
200: GT Combination Report Table No.1
1: Daily Combination Report Table No.2
201: GT Combination Report Table No.2
2: Daily Combination Report Table No.3
202: GT Combination Report Table No.3
NOTES: 1. When the mode set for taking combination reports does not match the mode of a report contained
in the table, that report will be skipped.
2. If no combination reports data have been programmed, Combination Report Table No. 1 (which is
issued by depressing the [AT/TL] key alone for Daily Reports and depressing 200 [AT/TL] for GT
Reports) is auto-preset with All Department Report and Financial Report. It will be active as Table
No. 1 content unless no data are programmed for Table No. 1.
3. The report output order is determined by the order programmed in each table.
4. The drawer will open when a contained report is ruled to open the drawer.
5.2

General Notes On Report Takings

1. The cashier signed-OFF or signed-OUT condition is required for taking any Z reports in the Code Entry
Method. (Otherwise, an error will result when the Mode Lock is turned to the "X" or "Z" position.) However, in
case of a standalone system with PC connected and CVS spec. selected, X/Z reports can be taken during
Sign-ON and sales entries.
2. Reset reports will be printed on the receipt roll as well as on journal, and issued, regardless of the current
Receipt-ON/OFF status.
3. The [ITEM CORR] (or [VOID]) key may be depressed halfway during printing a report, for the purpose to
abort the receipt issuance (except for some short reports). When a report-abort has been operated for a reset
report, the memory of the report data will not be cleared.
REPORT NAME
Z for Reset
X
X
X
X
X
X
X
X
X
X
X
X
| | [AT/TL]
5- 4
5.1 Combination Reports
The following are reports
Ask your TOSHIBA TEC
AVAILABLE REPORTS
Z GTX GTZ
Z GTX GTZ
Z
Z GTX GTZ
GTX
Z
Z GTX GTZ
Z GTX GTZ
Z GTX GTZ
EO1-11152