Combination Reports - TEC FS-1450 Owner's Manual

Combination Reports

Multiple reports can be programmed to be issued is one operation sequence. The following are reports
programmable for combinations (max. 5 reports in one table, max. 3 tables). Ask your TOSHIBA TEC
representative for information of the contents of your Combination Report Tables or for changes.
REPORT NAME
Financial Report
All Cashier Report
All Salesperson Report
Credit Company Sales Report
Department Group Report
Media Sales and In-drawer Report
Hourly Range Report
All Department Report
All Media Sales & Cash-in-drawer Report
All PLU Report
All Order Tables Report
PLU Group Sales Report
KEY OPERATION:
Enter the Report Combination-ID No.:
None (Simply depress [AT/TL]):
200: GT Combination Report Table No.1
1: Daily Combination Report Table No.2
201: GT Combination Report Table No.2
2: Daily Combination Report Table No.3
202: GT Combination Report Table No.3
NOTES: 1. When the mode set for taking combination reports does not match the mode of a report
contained in the table, that report will be skipped.
2. If no combination reports data have been programmed, Combination Report Table No.1
(which is issued by depressing the [AT/TL] key alone for Daily Reports and depressing 200
[AT/TL] for GT Reports) is auto-preset with All Department Report and Financial Report. It
will be active as table No.1 content unless no data are programmed for Table No.1.
3. The report output order is determined by the order programmed in each table.
4. The drawer will open when a cotained report is ruled to open the drawer.
Mode Lock: X for Read
Z for Reset
Daily Combination Report Table No.1
- 12 -
AVAILABLE REPORTS
X Z GTX GTZ
X Z GTX GTZ
X Z
X Z GTX GTZ
X GTX
X
X Z
X Z GTX GTZ
X
X Z GTX GTZ
X Z
X Z GTX GTZ
[AT/TL]
EO1-11097