Enforced Sign-Off Of A Cashier (Code Entry Method) - TEC MA-1595-1 SERIES Owner's Manual

3. MANAGER'S OWN OPERATIONS IN "MGR" MODE
3.2

Enforced Sign-OFF of a Cashier (Code Entry Method)

Each cashier signs-ON to start operations, signs-OUT for leaving the register for a while, signs-IN when comes
back, and signs-OFF to end operations (refer to the OPERATOR'S GUIDE). However, when a cashier once
signed-ON and then signed-OUT for taking a break does not come back (or the cashier may have operated a
Sign-OUT by mistake instead of a Sign-OFF), the register cannot be operated. No one else can operate Sign-
OFF, either, because the same cashier must sign-IN first before Sign-OFF. In this case, the manager may
operate an Enforced Sign-OFF.
In a Signed-OUT condition
CONDITION
OPERATION
Mode Lock: MGR
The 2-digit Cashier Code
(manager-assign portion) [LOG/RECEIPT] (or [LOG]) ........... The same will result as the normal Sign-OFF.
01 to 99
For verifying the code and the assigned cashier's name:
Chapter 7: VERIFICATION OF PROGRAMMED DATA
• CASHIER CODE AND NAME READ
For programming or changing the cashier's names or assigned codes:
Chapter 6: PROGRAMMING OPERATIONS
• CASHIER CODE AND NAME PROGRAMMING (Submode 2)
The 2-digit code assigned to each cashier. As for the code
opening and assigned cashier names, refer to the following:
-- Receipt Print Format --
7(& 6725(
7(& 6725(
 3($&+ '5,9(
3+21( 
2SHQ  DP WR  SP
&ORVHG HYHU\ :HGQHVGD\
 681 
6,*1 2
6,*1 2)) ))
∗∗
-21(6
3.2 Enforced Sign-OFF of a Cashier (Code Entry Method)
∗∗
  70
3- 2
EO1-11152