General Maintenance; Cleaning The Covers; Removing Jammed Paper; Clearing The Cutter Error - TEC MA-1595-1 SERIES Owner's Manual

15. GENERAL MAINTENANCE

15. GENERAL MAINTENANCE
1. DO NOT POUR WATER directly onto the ECR, as this may cause electric shock or fire.
2. The Journal Take-up Motor becomes very hot while printing. To avoid getting burned, never
touch the Journal Take-up Motor.
CAUTION!
Never use an organic solvent like thinners or benzene for cleaning. Using such solvents may
discolor the cover.

15.1 Cleaning the Covers

Wipe the covers with a soft dry cloth slightly moistened with mild detergent. After using detergent for cleaning, be
sure to wipe it off with a slightly moistened cloth.

15.2 Removing Jammed Paper

1) Turn the power OFF.
2) Open the Receipt Frame Cover Ass'y. If Receipt Frame Cover Ass'y will not open because of paper jam, turn
knob until pin appears in opening by triangle.
3) Remove the jammed paper. DO NOT USE any sharp implement or tool as these will damage the printer.
4) Re-load the receipt roll. (Refer to Section 6.1 Installing/Replacing the Receipt/Journal Roll.)

15.3 Clearing the Cutter Error

When the display indicates "CUTTER ERROR", clear this error by following procedure below.
1) Turn the power OFF.
2) Turn the power ON.
3) Depress the [C] key.
WARNING!
Knob
15- 1
15.1 Cleaning the Covers
Pin
EO1-11152