Scale Item Entry In " - " Mode; Electronic Fund Transfer (Eft) Operation In " - " Mode - TEC MA-1595-1 SERIES Owner's Manual

4. OPERATIONS IN " - " MODE
4.3

Scale Item Entry In " - " Mode

Any scale item entered in the "REG" or "MGR" mode at the time of purchase must be entered manually (Manual
Scale Entry but not Auto Scale) in the " - " mode at the time of return or cancel.
That is, for entering a scale item (once purchased) in the " - " mode, you must read the written net weight on the
item (if any) or read the net weight in the scale display panel by placing it on the scale platter, then enter the net
weight value, manually in the procedure described as MANUAL SCALE ENTRY operation in the OPERATOR'S
GUIDE.
NOTE: At the link-PLU entry, the Scale Entry can be performed for the head-link PLU but not for the sub-link
PLU.
4.4

Electronic Fund Transfer (EFT) Operation In " - " Mode

(1) Void Credit Sale
This operation is performed for canceling credit sale transactions.
OPERATION
Sales Item Entry
(|Authorization Code|) [#]
Max. 11 characters
Customer Receipt Print
(2) Void Credit Refund
This operation is performed for canceling credit refund transactions.
[RTN MDSE] to be continued to the top of "Void Credit Sale" sequence
NOTES: 1. Receipt post-Issue operation after finalizing a sale by the EFT is unavailable.
2. Key operation on the ECR is unavailable during the inquiry to the host.
3. Values 0 to 9 and A to Z should be used to enter the Authorization Code.
4. Issuance of the Store Receipt is selectable.
5. In the Receipt-OFF mode, payment by the EFT media cannot be made.
6. The Validation Print operation is not possible after performing the Void Credit Sale or the Void
Credit Refund operation.
(3) Cashing Debit Refund
This operation is performed for canceling debit cashing transactions.
OPERATION
| Amount to be cashed |
Max. 7 digits
EFT terminal responds "APPROVAL".
NOTES: 1. Before performing this operation, the [DEBIT] (or [EBT CASH]) key should be programmed with
the status "no-purchase cashing is allowed". Also each EFT Media Key should be programmed
with the statuses both "with EFT process" and "off line authorization is available". Failure to do
this may cause an error.
2. For the EFT function, do not perform any registration in Receipt OFF mode.
3. Receipt post-Issue operation after the Cashing Debit Refund is unavailable.
([TXBL TL]) (|Tendered Amount|) [CREDIT]
(|Reference No.|) [#]
Max. 16 digits
Store Receipt Print
[DEBIT]
or
[EBT CASH]
4- 3
Max. 7 digits
EFT terminal responds "APPROVAL"
Card Slide Input the Pin No. from the
Pin Pad. Then depress the
[ENTER] key.
Customer Receipt Print
EO1-11152
4.3 Scale Item Entry In " - " Mode
Card Slide
Store Receipt Print