Salesperson Code And Name Programming (Submode 20) - TEC MA-1595-1 SERIES Owner's Manual

6. PROGRAMMING OPERATIONS
6.11

Salesperson Code and Name Programming (Submode 20)

By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the name of
each salesperson can be programmed in maximum 12 characters.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
Repeat for other Salespersons
20 [X] | Salesperson Code | [ST]
Max. 2 digits (1 to 99)
NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for a name.
A combination of both types is also available.
2. Even if no name is programmed (i.e. skipping the Character Entries before the second [ST] key)
for a Salesperson Code, that code can be used in sale entries. Then, auto-preset ID symbol "SP
xx" (xx = Salesperson Code) will be printed instead of a name in this case, for his/her ID in receipt
print, etc.
Example) To program the following salesperson code and name:
Code Name
1 White
2
3 Jansen
Key Operation: Mode Lock: SET, Enter 20 and depress the [X] key.
1 [ST] (Salesperson Code 1)
507 [#] (W)
608 [#] (h)
609 [#] (i)
704 [#] (t)
605 [#] (e)
[ST]
2 [ST] (Salesperson Code 2)
503 [#] (S)
704 [#] (t)
601 [#] (a)
603 [#] (c)
709 [#] (y)
[ST]
3 [ST] (Salesperson Code 3)
410 [#] (J)
601 [#] (a)
614 [#] (n)
703 [#] (s)
605 [#] (e)
614 [#]
(n)
[ST]
[AT/TL] (to complete this submode)
Stacy
6.11 Salesperson Code and Name Programming (Submode 20)
* (For sequentially programming codes, the
code number specification can be skipped.)
Character Entries
See NOTE 1 below
6-28
[ST] [AT/TL]
7(& 6725( 7(& 6725(
 3($&+ '5,9(
3+21( 
2SHQ  DP WR  SP
&ORVHG HYHU\ :HGQHVGD\
 021 
3 3
 :KLWH
 6WDF\
 -DQVHQ
  70
EO1-11152