Plu Entry (Manual Plu Code Entry); Plu Price Shift Entry; Plu Entry Through Barcode Scanner - TEC MA-1535 series Owner's Manual

9. REGISTERING PROCEDURE AND PRINT FORMAT
9.5

PLU Entry (Manual PLU Code Entry)

Each PLU is pre-programmed as the "PRESET" type (with a price programmed) or "OPEN" type (with
no price programmed). Perform operation depending on the type selected.
OPERATION
Preset PLU entry
⏐PLU Code⏐ [PLU]
[PLU Preset-Code Key] of Preset-PLU
Open PLU entry
⏐Price⏐ [PRICE]⏐Open-PLU Code⏐ [PLU]
⏐Price⏐ [PRICE] [PLU Preset-Code Key] of Open-PLU
9.6

PLU Price Shift Entry

Three different prices can be programmed for each PLU.
OPERATION
[PRICE 1] PLU Entry
[PRICE 2] PLU Entry
[PRICE 3] PLU Entry
NOTE: Either of the following features can be selected by the program option.
•
The price shift operation is effective only for the next PLU entry. After the PLU entry, the price
of that PLU automatically returns to the 1
•
Or, the selected price keeps effective until other PRICE key is depressed.
9.7

PLU Entry through Barcode Scanner

When a barcode scanner is connected, a PLU entry can be done by simply scanning the barcode. It is
true in any operation pattern relating to PLU entries (Repeat, Quantity Extension, etc.)
Basic Operation Sequence:
Scan the barcode on the required item (instead of ⏐PLU Code⏐ [PLU]). A short tone sounds when the
barcode is successfully scanned.
Manual Entry:
When entering a source code or in-store code manually instead of bar code scanning, the [EAN] key is
pressed.
|Source code or In-store code| [EAN]
st
price.
9- 4
9.5 PLU Entry (Manual PLU Code Entry)
Tomato
PLU0000000000100
EO1-11148
1.00T
1.50