Interrupt Mode
1
This mode enables you to interrupt the current job or a reserved job to make priority copies.
This mode is useful if you need to make a rush copy during a long copy job.
NOTE
• You can make interrupt copies whenever the machine is ready to scan.
• To cancel the Interrupt mode, press [Interrupt].
• To cancel previously set copy modes, press
1
1-28
Interrupt Mode
Press [Interrupt].
If you want to make copies after changing the Department ID while Department ID
Management is enabled, press
-
(numeric keys). (See Chapter 6, "System Manager Settings," in the Reference Guide.)
NOTE
The current job does not stop printing immediately after you press [Interrupt]. Printing of the
current job stops only when the actual printing of the priority or interrupt copy starts.
. (The Interrupt mode itself is not cancelled.)
(Log In/Out)
enter the Department ID and password using