7.
Press [Print].
The encryption key for retrieving the backup data is printed.
8.
Press [Continue].
9.
Press [Exit].
10.
Press the [User Tools/Counter] key.
11.
Turn off the power and the main power switch, and then turn the main power switch back
on.
For details about turning off the power, see "Turning On the Power", About This Machine.
Canceling Data Encryption
Use the following procedure to cancel the encryption settings when encryption is no longer necessary.
• After completing this procedure on the machine's control panel, turn off the power and restart the
machine to enable the new settings. Restarting can be slow when there is data to be carried over to
the hard disk.
• Before disposing of a hard disk, note that even if [Format] is selected and encryption is canceled,
data stored on the hard disk is not erased.
1.
Press the [User Tools/Counter] key.
Encrypting Data on the Hard Disk
5
129