4.
Enter the End IPv4 Address, and then press the [OK] key.
Be sure the number you enter for End IPv4 Address is larger than that for Start IPv4 Address.
5.
Select [Parallel Interface(Sim.)] using [ ] or [ ], and then press the [OK] key.
6.
Select [Apply] using [ ] or [ ], and then press the [OK] key.
7.
Select [USB(Sim.)] using [ ] or [ ], and then press the [OK] key.
8.
Select [Apply] using [ ] or [ ], and then press the [OK] key.
9.
Press [Exit].
Integration Server Authentication
3
85