Replacing The Backrest - TiLite TRA AERO T Owner's Manual

CHAPTER 4: BACKRESTS AND PUSH HANDLES

Replacing the Backrest

Tools Needed:
• 5/32" Allen Wrench
1. Remove the backrest upholstery. See "Velcro
Straps Back Upholstery" on pages 7-1 to 7-3.
2. Remove the backrest posts. See "Adjusting the Backrest Height" on pages 4-3.
3. Remove the backrest sleeves. See Figure 4-5.
4. Remove the two Allen screws (one on each side of the chair) and remove the backrest. See Figure 4-5.
5. Install the new backrest and securely tighten the two Allen screws.
6. Install the backrest sleeves in the new backrest.
7. Reinstall the backrest posts.
8. Reinstall the backrest upholstery.
Aero T/TRA Owner's Manual
Figure 4-4
Adjusting the Backrest Height
Backrest
Posts
Allen
Screws
Backrest
-Style Adjustable Back Upholstery" or "Tension Adjustable by
®
4-4 OM_Aero T_TRA_0414RevB