Adjusting The Armrest Height - TiLite TRA AERO T Owner's Manual

CHAPTER 5: ARMRESTS

Adjusting the Armrest Height

Tools Needed:
• 5/32" Allen Wrench
1. Remove the armrest from the receiver.
2. Remove the Allen screw and washer securing the armrest stop. See Figure 5-7.
3. Reassemble the armrest stop in the desired location on the armrest upright (in 1/2" increments).
4. Securely tighten the Allen screw.
5. Reinstall the armrest in the receiver.
Aero T/TRA Owner's Manual
Figure 5-6
Swing Away Flip-Back
Figure 5-7
Adjusting the Armrest Height
Armrest
Upright
Washer
Armrest
Stop
5-4
Allen
Screw
OM_Aero T_TRA_0414RevB