Disengaging; Adjusting - TiLite TRA AERO T Owner's Manual

Disengaging

To disengage the User-Friendly Anti-Tip, grip the anti-tip firmly, pressing down on the release lever, raise the anti-tip
until the anti-tip receiver re-engages in the anti-tip mount in the "up" position shown in Figure 13-4.

Adjusting

To adjust the height of the User-Friendly Anti-Tip, press the two release buttons on the telescoping lower tube and
adjust the height of the lower tube so that the wheel is within 1-1/2" to 2" off the ground. See Figure 13-5.
Aero T/TRA Owner's Manual
Figure 13-4
Disengaging the Anti-Tip
Figure 13-5
Adjusting
Anti-Tip
Mount
Release Button
Receiver
Upper Tube
Lower Tube
Release Button
13-3
CHAPTER 13: ANTI-TIPS
OM_Aero T_TRA_0414RevB