Adjustable Height Backrest (With Or Without Integrated Push Handles Tx And Xc) - TiLite Aero 2GX Owner's Manual

CHAPTER 4: BACKRESTS, PUSH HANDLES AND STROLLER HANDLES
4. Adjust the backrest extension tubes to the desired height. See
Figures 21 or 22.
5. Reinstall the stroller handle or armrest receivers if removed in Step 3
above.
6. Reinstall the backrest upholstery. Adjust the backrest upholstery
to the desired tautness. See "Chapter 7: Back Upholstery; Seat
Upholstery; and Seat Cushions" on pages 36-40.
Adjustable Height Backrest (With or Without
Integrated Push Handles)
(TX and XC)
Note: On the TX, the backrest is aluminum. On the XC, the backrest is
titanium.
Adjusting the Backrest Height
Tools Needed:
• 5/32" Allen Wrench
Note: In order to adjust the backrest height you will have to remove
the backrest upholstery. Therefore, make a note of the tautness of
the backrest upholstery before removing it so you can reinstall it to
approximately the same degree of tautness.
1. Remove the backrest upholstery, including the two fastening flaps.
See "Chapter 7: Back Upholstery; Seat Upholstery; and Seat
Cushions" on pages 36-40.
2. On both sides of the chair, remove the Allen Screw that secures the
backrest post inserts inside the backrest post. See Figure 23.
3. Reposition both backrest post inserts to the desired height inside the
backrest posts, making sure to align the holes in the backrest post
inserts with the holes in the backrest posts.
4. Make sure both backrest post inserts are at the same height in the
backrest posts and reinsert and securely tighten the two Allen Screws.
5. Reinstall the back upholstery, adjust the upholstery to the desired
tautness.
I
WARNING
The threads on the Allen Screws that secure the backrest posts to
the backrest post inserts have been treated with a medium strength
threadlock to reduce the possibility that they will become loose. You
should be able to adjust the backrest height two or three times without
reapplying threadlock to these screws. If you repeatedly adjust the
backrest height, TiLite requires that you reapply a medium strength
threadlock after every second adjustment.
Non-Folding Fixed Height & Angle Backrest
(TX and XC)
If your chair has a non-folding Titanium Fixed Height Backrest, you cannot
adjust the backrest height or the backrest angle.
OM_FOLDING_0907RevB
Figure 22
2GX/Aero X Adjusting the Swing Away
Armrest Height
Integrated
Push Handle
(optional)
Allen Screws
Figure 23
Adjusting the Backrest Height
29
Backrest
Post Insert
Backrest
Post
Folding Owners Manual