Chapter 6: Side Guards; Cloth Side Guards; Removing/Replacing; Rigid Removable And Quad Removable Side Guards (Aluminum And Carbon Fiber) - TiLite TRA AERO T Owner's Manual

Cloth Side Guards

Removing/Replacing

1. Lift up on the seat cushion and remove it from the chair.
2. Separate the Cloth Side Guards from the seat upholstery and the back upholstery. See Figure 6-1.
3. If desired, install new Cloth Side Guards onto the seat and back upholstery.
Note: The fastening flaps that secure the Cloth Side Guards to the back upholstery wrap around the outside of the
back uprights and under the back upholstery flap.
4. Replace the seat cushion.

Rigid Removable and Quad Removable Side Guards (Aluminum and Carbon Fiber)

Using Rigid Side Guards

To remove either type of Rigid Side Guard, lift the side guard out of the side guard mount by grasping it at the top or
place finger in the hole and pull it upward. See Figure 6-2. To replace, place the bracket into the slot between the
side guard mount and the clamp and push down.
Quad Removable
Side Guard
Aero T/TRA Owner's Manual
Figure 6-1
Cloth Side Guard Removal/Replacement
Back Upholstry
Flap
Figure 6-2
Rigid Side Guards
Bracket

CHAPTER 6: SIDE GUARDS

Back
Uprights
Cloth
Side
Guard
Rigid Removable
Side Guard
Side Guard
Mount
6-1
Clamp
OM_Aero T_TRA_0414RevB