Compaq Prolinea Family Maintenance & Serice Manual page 42

XXXX - 14 Drive hardware error
---------------------------------------------------------------------------
XXXX - 15 Illegal drive command
---------------------------------------------------------------------------
XXXX - 16 Media was changed
---------------------------------------------------------------------------
XXXX - 17 Tape write protected
---------------------------------------------------------------------------
XXXX - 18 No data detected
---------------------------------------------------------------------------
XXXX - 21 Drive command aborted
---------------------------------------------------------------------------
65XX - 24 Media hard error
---------------------------------------------------------------------------
66XX - 24 Media hard error
---------------------------------------------------------------------------
67XX - 24 Media hard error
---------------------------------------------------------------------------
XXXX - 25 Unknown
---------------------------------------------------------------------------
Error
Code Description
---------------------------------------------------------------------------
XXXX - 30 Controller timed out
XXXX - 31 Unrecoverable error
XXXX - 32 Controller/drive
disconnected
XXXX - 33 Illegal controller
command
XXXX - 34 Invalid SCSI bus phase
XXXX - 35 Invalid SCSI bus phase
XXXX - 36 Invalid SCSI bus phase
XXXX - 39 Error status from
drive
XXXX - 40 Target timed out
XXXX - 41 SCSI bus stayed busy
XXXX - 42 ACK/REQ lines bad
XXXX - 43 ACK did not deassert
Replace the indicated device.
Replace the indicated device.
1. Disable write protect on tape
cartridge.
2. Replace tape drive.
Replace the indicated device.
Replace the indicated device.
1. Back up data and perform Surface
Analysis to reallocate defect.
2. Replace drive.
1. Replace current DATA CD with
different DATA CD
2. Replace drive.
1. Ensure correct media type for this
tape drive.
2. Replace current tape with new tape.
3. Replace tape drive.
Recommended Action
Replace the indicated device.