Compaq Prolinea Family Maintenance & Serice Manual page 172

QVision 2000+ Graphics Controller
If the computer has a QVision 2000+ Graphics Controller, complete the
following steps to change the monitor type:
1. Select the Monitor Selection icon from the QVision 2000 Power Desk
group.
2. Click on the Monitor Selection button and select the desired monitor
type from the list of monitors displayed.
3. Click on the Save and Exit button.
will be configured appropriately for the monitor.
PCI Local Bus Integrated Graphics Controller
If the computer has a PCI Local Bus Integrated Graphics Controller,
complete the following steps to change the monitor type:
1. Select the Winmode icon from the Compaq Utilities Group Box. This
launches a window showing the current configuration of your computer.
2. Select the desired monitor brand and model from the list of monitors
displayed.
3. Close the Winmode utility and exit Windows. When you restart Windows,
Windows will be configured appropriately for the monitor.
Setting Graphics Resolution
The quality of the picture you see depends on the resolution of the
monitor and the number of colors that are displayed. Although the setup
utility automatically selects the display configuration, you can manually
change the resolution to match a software program or suit personal
preferences. The procedure varies slightly for each graphic controller.
NOTE: If you are not sure which graphics controller is installed on the
computer, run Compaq Diagnostics to identify the installed
controller.
QVision 2000+ Graphics Controller
If the computer has a QVision 2000+ Graphics Controller, complete the
following steps to change the resolution:
1. Select the Control Panel icon from the QVision 2000 Power Desk group.
This launches a window showing the current configuration of your
computer.
2. Select a mode and then click on the SETUP button.
When you restart Windows, Windows