Compaq Prolinea Family Maintenance & Serice Manual page 103

manner at installation.
CD-ROM Drive
Ejecting a Compact Disc Manually
If you are unable to eject a CD from the CD-ROM drive by pressing the
load/eject button, you can eject the CD manually as follows:
1. Turn off the computer.
2. Insert a small rod or jeweler's screwdriver [1/16-inch (1.4-mm) blade]
into the manual eject hole (Figure 5-23) and push firmly to release the
tray. Note that the manual eject hole is immediately adjacent to the
drive eject button.
3. Slowly pull the tray out from the drive until the tray is fully
extended, then remove the CD.
Removing the CD-ROM Drive
To remove the CD-ROM drive, complete the following steps: