Compaq Prolinea Family Maintenance & Serice Manual page 28

Accessing the Configuration and Diagnostics Menu at Startup
To display the menu immediately after startup, complete the following
steps:
1. Turn on or restart the computer (Ctrl+Alt+Delete).
2. Press the F10 key as soon as the cursor moves to the upper-right corner
of the screen. This occurs immediately: The Power-On Self-Test (POST)
runs, you hear two beeps, then the cursor moves to the upper-right
corner.
3. If prompted, select the desired language.
4. A menu similar to the one shown in Figure 2-2 will be displayed. You
will be prompted through any procedure that you select.
Accessing the Configuration and Diagnostics Menu from Diskette
You can load either the Setup or Diagnostics diskette with this procedure.
To load either of the diskettes, complete the following steps:
1. Insert the diskette into drive A.