Compaq Prolinea Family Maintenance & Serice Manual page 29

2. Turn on or restart the computer (Ctrl+Alt+Delete).
3. If prompted, select the desired language.
4. If you load the Diagnostics diskette, a menu similar to the one shown
in Figure 2-2 will be displayed. If you select Computer Setup from this
menu, you will be prompted to insert the Setup diskette. You will be
prompted through any procedure that you select.
Compaq Diagnostics for Windows
Compaq Diagnostics for Windows utility contains the same functionality as
the DOS-based INSPECT program but in a Windows environment. To use the
Compaq Diagnostics for Windows utility, select the Compaq Diagnostics icon
from the Compaq Utilities group box.
use the tool bar or the menus to browse through the information. Some
examples of the information you can view are:
o Product name
o CPU information
o Cache size and type
o Mouse driver versions
o COM ports, LPT ports, modems
o ISA and PCI slot information
o Version of certain software (MS-DOS, Windows)
o ROM version
o Storage information
o Power Management settings
o Multimedia devices information
The MS-DOS version of INSPECT is available on the system partition and is
accessible as explained earlier in this section.
Chapter 2.4 Configuration and Diagnostics Menu Options
The Configuration and Diagnostics menu contains the following
troubleshooting utilities:
o Computer Setup
o Computer Checkup (TEST)
o View System Information (INSPECT)
o Test another computer
Once the program is running, you can