Compaq Prolinea Family Maintenance & Serice Manual page 40

===========================================================================
Table 2-12. Audio Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
3206 - xx Audio System Internal
Error
===========================================================================
Table 2-13. Pointing Device Interface Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
8601 - xx Mouse test failed
8602 - xx Interface test failed
===========================================================================
Table 2-14. CD-ROM Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
3301 - xx CD-ROM drive read
test failed
3305 - xx CD-ROM drive seek
test failed
6600 - xx ID test failed
6605 - xx Read test failed
6608 - xx Controller test
failed
6623 - xx Random read test
failed
===========================================================================
The SCSI error codes are written in the format AABB-CC and can be
determined by looking up the respective parts of the code in the three
corresponding tables numbered 2-15A, 2-15B, and 2-15C shown below. AA
(Table 2-15A) identifies the drive type being tested. BB (Table 2-15B)
identifies the type of test. CC (Table 2-15C) identifies the exact error
received.
For example, if you received a diagnostic error code of 6523-05, you would
look at Table 2-15A to identify the meaning of the first two numbers, 65.
This indicates a hard drive problem. The second set of two numbers, 23,
refers to a random read, as shown in Table 2-15B. The last two numbers,
Recommended Action
Replace the audio board and retest.
Recommended Action
The following steps apply to 8601 - xx
and 8602 - xx:
1. Replace with a working pointing
device and retest.
2. Replace pointing device interface
board and retest (if applicable).
3. Replace the system board and retest.
Recommended Action
The following steps apply to error
codes 3301 - xx through 3305 - xx and
6600 - xx through 6623 - xx:
1. Replace the CD and retest.
2. Check the jumper settings on the
adapter board.
3. Verify that the speakers are
connected.
4. Check and/or replace the power and
signal cables and retest.
5. Replace the CD-ROM drive and retest.