Compaq Prolinea Family Maintenance & Serice Manual page 37

1736 - xx Drive monitoring test
failed
---------------------------------------------------------------------------
* ECC = Error Correction Code
===========================================================================
Table 2-10. Tape Drive Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
1900 - xx Tape ID failed
1901 - xx Tape servo write
failed
1902 - xx Tape format failed
1903 - xx Tape drive sensor
test failed
1904 - xx Tape BOT/EOT test
failed
1905 - xx Tape read test failed
1906 - xx Tape write/read/
compare test failed
===========================================================================
Table 2-11. Video Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
501 - xx Video controller test
failed
502 - xx Video memory test
failed
503 - xx Video attribute test
failed
504 - xx Video character set
test failed
505 - xx Video 80 x 25 mode
9 x 14 character cell
test failed
506 - xx Video 80 x 25 mode
8 x 8 character cell
test failed
507 - xx Video 40 x 25 mode
test failed
508 - xx Video 320 x 200 mode
color set 0 test
Recommended Action
The following steps apply to 1900 - xx
through 1906 - xx error codes:
1. Replace the tape cartridge and
retest.
2. Check the switch settings on the
adapter board.
3. Check and/or replace the signal
cable and retest.
4. Replace the tape adapter board
(if applicable) and retest.
5. Replace the tape drive and retest.
6. Replace the system board and retest.
Recommended Action
The following error codes apply to
501 - xx through 516 - xx error codes:
1. Replace the monitor and retest.
2. Replace the system board.