Compaq Prolinea Family Maintenance & Serice Manual page 111

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When returning the drive cage from its elevated position to its resting
position, lower the cage slowly and keep fingers clear of its travel path.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When returning the drive cage to its resting position, ensure that none of
the cables are pinched between the drive cage and the base pan.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
6. Lower the drive cage into its normal operating position, taking care
not to damage the cables or the drive cage locks.
7. The hard drive is obstructed from view by a blank bezel. The hard drive
and bezel are secured in place with two screws on the front of the
computer. The bezel is installed with its mounting tabs behind the
mounting tabs for the hard drive. Remove the two screws (Figure 5-31),
remove the bezel (Figure 5-32) and slide the hard drive out of the
front of the drive cage (Figure 5-32).