Compaq Prolinea Family Maintenance & Serice Manual page 41

05, indicate a seek failure, as listed in Table 2-15C. When you combine
this information, you know that the diagnostics program was testing the
random-read functioning of the hard drive and received a seek failure.
The device is faulty and must be replaced.
Table 2-15A. SCSI Device Names
===========================================================================
65XX - XX
66XX - XX
67XX - XX
===========================================================================
Table 2-15B. SCSI Test Names
===========================================================================
XX00 - XX
XX03 - XX
XX05 - XX
XX06 - XX
XX08 - XX
XX23 - XX
XX28 - XX
===========================================================================
Table 2-15C. SCSI Test Error Codes
===========================================================================
Error
Code Description
===========================================================================
XXXX - 02 Drive not installed
---------------------------------------------------------------------------
XXXX - 03 Media not in drive
---------------------------------------------------------------------------
XXXX - 05 Seek failure
XXXX - 06 Drive timed out
XXXX - 07 Drive busy
XXXX - 08 Drive already reserved
XXXX - 09 Unknown
XXXX - 10 Unknown
XXXX - 11 Media soft error
XXXX - 12 Drive not ready
XXXX - 13 Media error
Hard Drive
CD-ROM Drive
Tape Drive
ID
Power Check
Read
SA/Media
Controller
Random Read
Media load/unload
Recommended Action
Check cable connections.
Install DATA CD/write-enabled tape in
drive.
Replace the indicated device.