Replacing Push Rims; Replacing Front Wheel - Invacare Top End Eliminator User Manual

Table of Contents

Invacare® Top End®

10.4 Replacing Push Rims

1. Remove the rear wheel A from the racing chair.

2. Loosen the mounting screws B that secure the existing

pushrim to the rear wheel.

3. Remove the existing pushrim.

4. Install the new pushrim onto the rear wheel and

securely tighten.

For standard wheel, ensure the rim is pushing

onto the spokes at the top of the rear wheel.

5. Reinstall rear wheel onto the racing chair.

Reverse the steps below to remove the front wheel.

There will be some play in the front wheel. This is

common in all front hubs.

Fig. 10-4

1. Remove the two hex axles A from the front wheel B.

2. Line up the mounting holes in the front wheel with the

holes in the forks .

3. Install the hex axles and securely tighten the front

wheel to the fork.

Fig. 10-5

60001470-A

Table of Contents