OPERATING THE STAND UP LIFT
Raising/Lowering the Stand Up Lift
To raise the stand up lift, press the up arrow button to raise the lift arms and the patient.
To lower the stand up lift, press the down arrow button to lower the lift arms and the
patient.
NOTE: If the stand up lift is in the full Up position, it may be necessary to pull down slightly on
the lift arms before the lift arms will lower.
Opening/Closing the Legs
To open the legs, press the legs open
button.
Up Arrow
To close the legs, press the legs closed
Down Arrow
Button
button.
Button
Legs Open
Legs Closed
Button
Button
FIGURE 3.1 Pendant Buttons
Performing an Emergency Stop
NOTE: For this procedure, refer to FIGURE 3.2.
Press the RED emergency button on the control box to stop the boom assembly and
patient from raising or lowering.
Rotate the RED emergency stop button clockwise to disengage the emergency stop.
Rotate Clockwise to
Disengage Emergency Stop
Control Box
Press IN to
Stop Boom
FIGURE 3.2 Performing an Emergency Stop
19
Part No. 1145811
Stand Up Lift Model RPS350-2