Avaya 3641 Installation, Configuration And Administration page 75

Default Settings:
The profile options on the standby menu may be reset to their default values by the
Restore Defaults option in the Admin menu. These are the default settings:
Setting/profile
Ring Cadence
Ring Tone
Ring Volume
Vibrate Cadence
Ring Delay
Noise Mode
Headset/Speaker
Key Tones
Warning Tones
10 Push-to-talk
11 PTT Vibrate
12 Emergency Dial
10 Push-to-talk must be enabled by the system administrator before it can be activated by the user. If it is not enabled,
then it will not appear on the Config menu and will not be "On" for any profile.
11 11 PTT Vibrate is available only when Push-to-talk has been enabled by the system administrator.
12 Emergency Dial must be enabled by the system administrator. If enabled, it will be "On" (or available for use) in every
profile.
Issue 6, January 2011
Silent Vibrate
Off Off
Tone 1 Tone 1
1 1
Off PBX
0 0
Normal Normal
Speaker Speaker
Off Off
Off Off
Off Off
Disabled Disabled
On On
Avaya 3641/3645 Wireless IP Telephone Configuration
Soft Loud
PBX PBX
Tone 1 Tone 1
3 7
Off Off
0 0
Normal Normal
Speaker Speaker
On On
Off Off
On On
Disabled Disabled
On On
Custom
PBX
Tone 1
5
PBX
5
Normal
Speaker
On
Off
On
Disabled
On
75