Avaya 3641 Installation, Configuration And Administration page 58

Part B: Avaya 3641/3645 Wireless IP Telephone
Protected Speed-dial
The protected speed-dial number is designed to be programmed to a number that should
be called in emergency situations. It appears as the first item on the speed-dial list and is
specially marked with a greater-than symbol (>) as the first character in its name. Only
one such number can be programmed Enter the number to be dialed, the name (e.g.
Security), and scroll to assign to one key press. The choices for this key press are 1-9, 0,
*, #, or ^. The carat represents the volume up and down buttons. This number must be
programmed in every handset. This setting cannot be modified by the user. This feature is
not available in a handset where the user has disabled Pre-dial in the Config menu.
Password [Disable/Enable]
The password option controls access to the Admin menu. To modify the password
requirement, the default or previously set password must be entered to verify the change.
The password must be set in each handset for which controlled access is desired. The
Password option operates as a toggle between Enabled and Disabled. The info line will
display the current state. Press NavOK to change the password protection state. Change
Password will appear only if the password is enabled. The password is disabled by default.
All alphanumeric characters as described above are permitted. A space may be entered in
the password by pressing the # key twice.
Speakerphone
The speakerphone may be disabled when quiet handset operation is required. Disabling
the speakerphone will remove the speakerphone softkey from the active mode display. The
current speakerphone setting is shown on the info line. Press NavOK to toggle to the
alternate setting.
Clear Extension
When the extension stored in the handset is cleared, the handset must redo the Extension
and Password entry steps prior to registering with the PBX. This option is guarded with an
Are you sure? query before being executed. Be aware that Call Logs are not cleared when
the extension is cleared and the handset is registered with a new extension. To clear Call
Logs press the Logs softkey from standby mode and select Clear Logs.
IP Office [Disable/Enable]
For proper display handling on the Wireless IP Telephone, enable the IP Office when using
the IP Office system.
IP Office does not support Call Log functionality. If IP Office is enabled,

Call Log features will not appear in the handset. The Instead of opening a
call log, the Redial feature is accessed by a softkey which lists the 10 most
recently dialed numbers which can be redialed.
Auto Extension
This setting affects the handset extension number displayed when the handset is in
standby mode. If enabled, the handset automatically displays the first extension available
out of the first line appearance extension the first bridged line extension or the configured
extension. When disabled, the handset only displays the configured extension.
Call Log Dial
In the event that users should not be allowed to directly call back numbers from the call
logs stored in the handset, disable the Call Log Dial option.
58 Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool