Avaya 3641 Installation, Configuration And Administration page 141

Message Description
No APs Heard The handset is unable to hear beacons/probes
from any AP in the network in site survey
mode.
No AVPP IP The Wireless IP Telephone is configured for
"static IP" (as opposed to "use DHCP") and no
valid AVPP address has been entered.
No AVPP Response y...y – AVPP IP address.
yyy.yyy.yyy.yyy
Wireless IP Telephone has lost contact with the
AVPP.
No AVPP Server Wireless IP Telephone can't locate AVPP.
AVPP is not working.
No LAN connection at the AVPP.
No AVPP Server Wireless IP Telephone unable to perform DNS
No DNS Entry lookup for AVPP, server had no entry for AVPP.
No AVPP Server Wireless IP Telephone is unable to perform DNS
No DNS IP lookup for AVPP, no IP address for DNS server.
No Call Server This indicates that while a Communication
Manager has responded to the Gatekeeper
(The No Call Server
Request message, it is not responding to the
message may include an
Registration Request message.
error indication)
No Call Server IP The Wireless IP Telephone cannot obtain an IP
address for an Avaya Aura™ Communication
Manager.
No DHCP Server Wireless IP Telephone is unable to contact the
DHCP server.
No Extension All Wireless IP Telephones require an Extension
for H.323.
No Func Code Wireless IP Telephone software download files
are incorrect or corrupted.
No Gatekeeper The Wireless IP Telephone has not received a
response from the gatekeeper.
No Gatekeeper IP The Wireless IP Telephone is configured for
static IP addresses and no valid unicast IP
address is assigned for gatekeeper
configuration.
Issue 6, January 2011
Wireless IP Telephone Status Messages
Action
Verify that network is properly configured
and the handset is able to hear beacons
from the AP.
Enter a valid AVPP IP address in the
configuration setting or change to "use
DHCP."
This may be caused by bad radio reception
or a problem with the AVPP. The Wireless IP
Telephone will keep trying to fix the problem
for 20 seconds, and the message may clear
by itself. If it does not, the Wireless IP
Telephone will restart. Report this problem
to the system administrator if it keeps
happening.
IP address configuration of AVPP is wrong or
missing.
Check error status screen on AVPP.
Verify AVPP connection to LAN.
The network administrator must verify that a
proper IP address has been entered for the
AVPP DHCP option.
The network administrator must verify
proper DHCP server operation.
Check that the Wireless IP Telephone is
contacting the correct Communication
Manager, and that the Communication
Manager is correctly configured for the
extension in question.
Assure that the Wireless IP Telephone is
administered properly for its environment.
Refer to the section on Wireless IP Telephone
Configuration and Communication Manager
Integration Factors for details on
configuring the Wireless IP Telephone.
Check that DHCP is operational and
connected to WLAN or use Static IP
configuration in the Wireless IP Telephone.
Enter a valid Extension in the configuration
settings.
Reconfigure the handset to gain access to
the WLAN and download new code.
Verify that the gatekeeper is running and
has network connectivity to WLAN
infrastructure.
Configure a valid IP address in Admin
menus.
141